You are here: Home > RESTORE HEALIGHTS & PAINT

HEADLIGHTS

Apply Flitz directly to headlight lens and run  Buff N Polish Ball slow to spread the Polish out.  Now increase speed fishing at high speed for an exceptionally clear finish.  Note: Some headlights have a clearcoat or film over the lens.  This may require wet sanding to remove the film.  Use between 1500 to 2000 grit wet/dry sandpaper to wet sand the film off.  This method may also be used to remove minor scratches or sand pitting. After sanding Polish with Flitz.

 

Plexiglas & Eisenglass (Convertible top material) 

For cleaning water spots and light stains use Flitz with a damp Microfiber Cloth, buff with a clean dry Microfiber Cloth.  For scruff marks and discoloration use Flitz with a dry Microfiber Cloth or a Flitz Buff N Polish Ball.
Use Flitz Speed Waxx for an exceptionally clear view to maintain clarity. Use with Flitz Microfiber Cloth.

 

AIRCRAFT PLEXIGLASS

Always perform a test spot in a small unnoticeable area.  Use Flitz  instructions for HEADLIGHTS.  If using the sand paper tip, use sandpaper on a sanding block to minimize any distortion to window.  Be sure to finish with the Flitz Speed Waxx using a Flitz Microfiber Cloths for an exceptionally clear view, to maintain clarity.

 

FIBERGLASS & PAINTED SURFACES
Flitz safely removes oxidation, sun fading, and minor scratches on fiberglass, Plexiglas and painted surfaces.  For large fiberglass and painted surfaces Flitz can be applied using a variety of buffers. 1. To use a Flitz Buff N Polish Ball to remove oxidation and light scratches, add a small amount of Flitz directly onto the surface to be restored.  Then run buffer slow at first to spread polish out.  Continue to run buffer on high speed to finish. 2.  a slow speed buffer (Under 1000 R.P.M.) may be used.  3. A Random Orbital buffer designed for this purpose may also be used.  If polishing by hand, apply FLITZ with a damp cloth, buff with a soft dry cloth.  For exceptional shine and luster finish with Flitz Speed Waxx.