|
Material Safety Data Sheet
According to ISO/DIS 11014
Printing date 08/25/2006 Reviewed on 08/25/2006
1 Identication of substance:
Product details: ·
Trade name: Flitz Metal, Plastic & Fiberglass Polish
Application of the substance / the preparation Metal Polish
Manufacturer/Supplier:
FLITZ INTERNATIONAL, LTD.
821 Mohr Avenue
Waterford, WI 53185
Telephone:
Fax :
EMail:
Website:
2 Composition/Data on components:
Chemical characterization
Description: Mixture of the substances listed below with harmless additions.
Dangerous components:
CAS: 112-80-1 Oleic Distillates 5 - 10%
CAS: 64342-88-7 Petroleum & White Spirit < 20%
CAS: 68603-42-9 Polydiethanolamid < 5%
CAS: 1336-21-6 Ammonia Solution 25% < 1%
CAS: 1344-28-1 Solid Polishing Powder < 30%
CAS: 7732-18-5 De-mineralized Water < 50%*
3 Hazards identication
Hazard description: void
Information pertaining to particular dangers for man and environment: The product does not have to be labelled due to the calculation procedure of internationalguidelines.
Classication system: The classication was made according to the latest editions of international substances lists, and expanded upon from company and literature data.
NFPA ratings (scale 0 - 4)
Health = 0
Flammability = 0
Reactivity = 0
HMIS-ratings (scale 0 - 4)
REACTIVITY
Health = 0
Flammability = 0
Reactivity = 0
4 First aid measures
General information: Instantly remove any clothing soiled by the product.
After inhalation: Seek medical treatment in case of complaints.Supply fresh air.
After skin contact: The product is not skin irritating.
After eye contact: Rinse opened eye for several minutes under running water. If symptoms per sist, consult doctor.(Contd. on page 2)USA
Material Safety Data Sheet
According to ISO/DIS 11014
Printing date 08/25/2006 Reviewed on 08/25/2006
Trade name: Flitz Metal, Plastic & Fiberglass Polish
After swallowing: Do not induce vomiting; instantly call for medical help. Rinse out mouth and then drink plenty of water.
5 Fire fighting measures
Suitable extinguishing agents: CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
Protective equipment: No special measures required.
6 Accidental release measures
Person-related safety precautions: Not required.
Measures for environmental protection: No special measures required.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders).
7 Handling and storage
Handling:
Information for safe handling: No special measures required.
Information about protection against explosions and fires: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
8 Exposure controls and personal protection
Additional information about design of technical systems: No further data; see item 7.
Components with limit values that require monitoring at the workplace:
8008-20-6 DEODORIZED KEROSENE
REL 100 mg/m³
TLV 200 mg/m³
as total hydrocarbon vapor; Skin (P)
Additional information: The lists that were valid during the compilation were used as basis.
Personal protective equipment:
General protective and hygienic measures: The usual precautionary measures should be adhered to in handling the chemicals.
Breathing equipment: Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application.USA
Material Safety Data Sheet
According to ISO/DIS 11014
Printing date 08/25/2006 Reviewed on 08/25/2006
Trade name: Flitz Metal, Plastic & Fiberglass Polish
Penetration time of glove material The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Not required.
9 Physical and chemical properties
General Information
Form: Pasty
Color: Blue
Odor: Ammonia-like
Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: 145°C (293°F)
Flash point: Not applicable
Ignition temperature: 240.0°C (464°F)
Auto igniting: Product is not selfigniting.
Danger of explosion: Product is not explosive.
Explosion limits:
Lower: 0.6 Vol %
Upper: 7.0 Vol %
Vapor pressure at 20°C (68°F): 23 hPa (17 mm Hg)
Density at 20°C (68°F): 1.150 g/cm³
Solubility in / Miscibility with
Water: Fully miscible
pH-value at 20°C (68°F): 9.0-10.0
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known
Dangerous products of decomposition: No dangerous decomposition products known
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: No irritant effect.
on the eye: No irritant effect.
Sensitization: No sensitizing effect known.
Additional toxicological information: The product is not subject to classification according to internally approved methods for preparations. When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.USA
Material Safety Data Sheet
According to ISO/DIS 11014
Printing date 08/25/2006 Reviewed on 08/25/2006
Trade name: Flitz Metal, Plastic & Fiberglass Polish
12 Ecological information
Additional ecological information:
General notes: Water hazard class 2 (Self-assessment): hazardous for water.
13 Disposal considerations
Product: ·
Recommendation: Smaller quantities can be disposed with household garbage.
Uncleaned packagings: ·
Recommendation:
Packaging can be reused or recycled after cleaning.
Dispose of packaging according to regulations on the disposal of packagings.
14 Transport information
DOT regulations:
-Hazard class: -
Land transport ADR/RID (cross-border):
· ADR/RID class: -
Maritime transport IMDG:
· IMDG Class:
- Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: -
15 Regulations
Product related hazard informations: Observe the normal safety regulations when handling chemicals.
The product is not subject to classification according to the directives on hazardous materials.
Safety phrases: 2 Keep out of the reach of children.
16 Other information
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship.
Department issuing MSDS: Department research & development
* Data compared to the previous version altered. USA
|
